05/10/16
Today I did my about me post and I taped the motors with electrical tape. I used scissors and put the tape covering the top holes on the battery and I started with the bottom holes but did not finish. Next class I am going to finish waterproofing the battery. It was alit ever than I originally shout it would be. I was also absent last class.
05/12/16
Today I finished taping the Motor, I drilled holes in the film canisters, tied the wires, pulled them through the top of the film canisters and started shredding the lining on top of the wires.
Next class I am going to finish stripping the wires and wax the batteries.
05/13/16
Today I finished stripping the wires and attaching them to the motor, I also finished waterproofing the motor with wax and put the propellers onto the motors. Next class I will help my group assemble the ROV to working condition so that we can test it in the pool.
05/16/16
Today I put the ROV motors on and went to the pool to test the buoyancy and cut the pool noodles to make it perfect. Next class I will figure out a way to put a grabbing or picking up mechanism on the ROV.
05/24/16
Today I finished attaching the hydraulic to the tether and tested out the bouncy.next class I will be absent.
No comments:
Post a Comment