Daily Log: QA

5/6/10- absent

5/10/16
Today we started construction on the ROV. I worked on waterproofing the motors with Emilia. We took electrical tape and taped the motor so no holes are showing. We almost finished, and next class we plan on finishing so we can move on to the next step. I was absent on the previous meeting.

5/12/16
Today Emilia and I finished taping the motors to waterproof them, and then we drilled holes in the film canisters. We started to put the tethers through the film canisters, but we didn't finish. Tomorrow we will finish that step.

5/13/16
Today Emilia and I finished waterproofing the motors, and almost finished attaching them to the propellers. We used wax to surround the ends of each canister, and then put the wires in the canister and put the lid on to seal everything in. We cleaned the casing, then started attaching the motors to the propellors. Next class we will finish the construction for the motors and propellors, and then attach all the components of the ROV to try it out in the pool!

5/16/20- absent

5/20/16
After being absent for a week, today I returned to help Merrill and Marie to attach the tongs we're going to use for the challenges. We used zipties to do this. Next week we will attach the tether to the tubing and test it out in the water.

5/24/16
Today we finished completing the hydraulic system which we attached to the tongs used for two of the challenges. We also used duct tape to tape the tether and the tubing together. Next class we will use a camera to help us practice for the challenges!

No comments:

Post a Comment